Finite Element Analysis of Piston using Aluminum Alloys on ANYSYS

Author(s):

Aditya Arvind Yadav , Sou. Sushila Danchand Ghodawat Charitable Trust’s Sanjay Ghodawat Institutes, Atigre, Dist- Kolhapur; Prashant M. Sagare, Sou. Sushila Danchand Ghodawat Charitable Trust’s Sanjay Ghodawat Institutes, Atigre, Dist- Kolhapur; Sonal Manglekar, Sou. Sushila Danchand Ghodawat Charitable Trust’s Sanjay Ghodawat Institutes, Atigre, Dist- Kolhapur; Anamika Mahadev Pol, Sou. Sushila Danchand Ghodawat Charitable Trust’s Sanjay Ghodawat Institutes, Atigre, Dist- Kolhapur; Jayashri Malpeddi, Sou. Sushila Danchand Ghodawat Charitable Trust’s Sanjay Ghodawat Institutes, Atigre, Dist- Kolhapur

Keywords:

Heat flux, PISTON, Aluminium Silicon Carbide

Abstract:

The piston reciprocates in the cylinder to complete the cyclic events and transmit gas pores to the crank shaft through the connecting rod. Piston is the most important component in an internal combustion engine. The working condition of piston in an internal combustion is so worst. During the combustion stroke the fuel get ignited with the help of spark plug. Due to this combustion of gases in the cylinder the thermal deformation and mechanical deformation causes piston cracks, tortuosity etc. It is very essential to check out or analyze the stress distribution, temperature distribution, heat transfer, thermal load, mechanical load in order to minimize the stress, minimize the thermal stress and different loads on working condition of the piston. The internal combustion engine piston is made of Al alloy. This creates difference between the running and design clearances.

Other Details:

Manuscript Id	:	IJSTEV4I7001
Published in	:	Volume : 4, Issue : 7
Publication Date	:	01/02/2018
Page(s)	:	8-23

Download Article