A Low Cost Oil Extraction Machine for Extraction of Oil from Gears

Siddhesh Nanaware; Pasanna Gondhale; S. D. Kemkar; Sandeep Nanaware

CALL FOR PAPERS : Dec-2023

Submission Last Date

25-Dec-23

Submit Manuscript Online

FOR AUTHORS

FOR REVIEWERS

ARCHIEVES

DOWNLOADS

Open Access

A Low Cost Oil Extraction Machine for Extraction of Oil from Gears

Author(s):

Siddhesh Nanaware , NBN Sinhgad School of Engineering; Pasanna Gondhale, Nbn Sinhgad School of Engineering, India; S. D. Kemkar, Smt. Chandibai Himathmal Mansukhani College, India; Sandeep Nanaware, Delphi Powers pvt. ltd.

Keywords:

Hobbing, Spindle, Shaft, Centrifugal force, R cube, Gear

Abstract:

This work illustrates a low cost mechanical system manufactured for extraction of oil which is present on gears when the gear is under manufacturing process. The sedimentation principle under centrifugal force is used as a basic principle in this system for removal of oil. The gear is spun at 1440rpm for 4 seconds for extracting oil. The centrifugal forces acts tangentially to the gears and is responsible for the removal of oil from the gears. This oil is collected in the oil pot and then supplied by tubes to the oil filter. Oil filter is used for filtration of oil coming from the oil pot. The filtered oil is again supplied for hobbing and shaving machines thus recycling and making it reusable. Similar setup with different dimensions can be used for different gears.